Macro reference

Text formatting

Bold text

To bold text, select the text and click on the toolbar icon

The third *word* in this sentence is bold

Preview

Italicize text

To italicize text, select the text and click on the toolbar icon

The third _word_ in this sentence is italicized

Preview

Underline text

To underline text, select the text and click on the toolbar icon

The third +word+ in this sentence is underlined

Preview

Strike-through text

To strike-through text, select the text and click on the toolbar icon

The third -word- in this sentence is struck-through

Preview

Color text

To change the color of text, select the text and click on the toolbar icon

            The third %{color:red}word% in this sentence is red
            The third %{color:#FF0000}word% in this sentence is red

Preview

The default color is red, to change the color either replace "red" in the markup with one of the other 16 web colors. W3C has listed 16 color names that will validate with any HTML validator. The color names are: aqua, black, blue, fuchsia, gray, green, lime, maroon, navy, olive, purple, red, silver, teal, white, and yellow. There are 150 cross browser color names you can use in addition.

You can otherwise type in a hexadecimal color value, as shown in the second line of markup.

Apply heading level

To apply header styling to a line of text, select the line and click on the appropriate heading level icon

            
            h1. This line is H1 heading
            
            h2. This line is H2 heading
            
            h3. This line is H3 heading

Preview

For a heading style to be applied there must be a blank line both above and below the line you're styling. If the preview looks like this:

h1. This line is H1

heading then you probably don't have the necessary blank lines.

Create bulleted list

To create a bulleted list, select the rows that will comprise the list and click on the toolbar icon

            * list item one
            * list item two
            * list item three

Preview

Create numbered list

To create a numbered list, select the rows that will comprise the list and click on the toolbar icon

            # list item one
            # list item two
            # list item three

Preview

Right indent text

To right indent text, select the text to be indented and click on the toolbar icon as many times as you want the text to be indented (each click adds a level of indentation rightwards)

            
            p(. right indent once
            
            p((. right indent twice
            
            p(((. right indent three times

Preview

For right indenting to be applied there must be a blank line both above and below the lines you're styling. If the preview looks like this:

p(. right indent once

heading then you probably don't have the necessary blank lines.

Left indent text (Outdent)

To left indent (outdent) text, select the text to be indented and click on the toolbar icon as many times as you want the text to be outdented (each click removes a level of right indentation)

            p. a fully outdented line

Preview

Left indenting has no effect except to remove a level of right indentation. Once there are no levels of right indentation remaining, the text will just remain left justified.

Charts

See Mingle tips and tricks for hints on macro syntax, chart layout and chart sizing.

Data series chart

A burnup chart showing the number of points of scope for stories in each card status over time. Trend lines have been added to project into the future.

Macro markup is space sensitive and we advise you to stick to the indentation scheme specified in the example.

{{ 
  data-series-chart  
    conditions: 'Type' = 'Story' AND NOT 'Iteration - Added' = NULL
    x-title: Iteration
    y-title: Total Story Points
    show-start-label: true
    data-point-symbol: diamond
    data-labels: true    
    cumulative: true
    chart-height: 500
    chart-width: 800
    plot-height: 375
    plot-width: 500
    series: 
    - label: Total Scope
      color: black
      data: SELECT 'Iteration - Added', SUM('Estimate')
    - label: Analysis Complete
      color: green
      trend: true
      trend-line-width: 2
      data: SELECT 'Iteration - Analysis Completed', SUM('Estimate') WHERE 'Iteration - Analysis Completed' IS NOT NULL
    - label: Development Complete
      color: orange
      trend: true
      trend-line-width: 2
      data: SELECT 'Iteration - Dev Completed', SUM('Estimate') WHERE 'Iteration - Dev Completed' IS NOT NULL
    - label: Signed Off
      color: blue
      trend: true
      trend-line-width: 2
      data: SELECT 'Iteration - Accepted', SUM('Estimate') WHERE 'Iteration - Accepted' IS NOT NULL
}}

Preview

When applying trend lines to burn up charts beware of the trend-scope and trend-ignore options as these are used to determine how many data points are used to plot the trend line. In particular:

a trend line that only has a single data point will be drawn vertically
to create a trend based on completed work only use the trend-ignore: zeroes-at-end-and-last-value option which will not include any zero values or the last none zero value

Parameters
Chart-level options
Name	Meaning	Required	Default value
three-d	One of [true/false] indicating whether to plot in a 3-d style	No
x-title	Specify the title for the x-axis. Defaults to name of property that is driving the labels.	No
y-title	Specify the title for the y-axis. Defaults to the aggregation of the first data series.	No
chart-height	Specify the height of the entire chart (plot area plus legend) in pixels.	No	300
chart-width	Specify the width of the entire chart (plot area plus legend) in pixels.	No	400
plot-height	Specify the height of the plot area in pixels.	No	220
plot-width	Specify the width of the plot area in pixels.	No	230
plot-x-offset	Specify the length of the offset of the plot area from the right of the chart area in pixels. Increasing the offset will move the plot closer to the centre of the chart area.	No	50
plot-y-offset	Specify the length of the offset of the plot area from the top of the chart area in pixels. Increasing the offset will move the plot closer to the centre of the chart area.	No	10
label-font-angle	Angle of the x-axis labels.	No	45
legend-top-offset	Specify the offset of the legend from the top of the chart area in pixels. Increasing the offset will move the legend lower in the chart area.	No	5
legend-offset	Specify the offset of the legend from the right side of the plot area in pixels. A negative offset will move the legend inside the plot area.	No	20
legend-max-width	Specify the maximum width of the legend in pixels. Legend labels will wrap to fit the maximum width.	No	120
cumulative	One of [true/false] indicating whether the data of each series accumulates or is stand-alone. Defaults to false.	No
series	A list of the actual data series to be plotted. At least one series is required. Markup format is same basic format as stack-bar-chart.	Yes
conditions	MQL WHERE clause narrowing the the set of cards available to each series.	No
x-labels-property	Allow user to specify a property for label values. Defaults to the property definition specified by the first data series. In either case, all values will be used as labels.	No
x-labels-start	Allow user to specify the start value for labels on the x axis. Must be a valid, existing value for the x labels property. Defaults to first value for the x labels property. When x labels property is a date property, the value can be earlier than any existing value. Note that when plotting a cumulative chart, this parameter does not impact the scope of included cards in any data accumulation. I.e, this parameter only impacts the scope of what is drawn. Use the conditions parameter to restrict the cards to be accumulated.	No
x-labels-end	Allow user to specify the end value for labels on the x axis. Must be a valid, existing value for the x labels property. Defaults to last value for the x labels property. When x labels property is a date property, the value can be later than any existing value. Note that when plotting a cumulative chart, this parameter does not impact the scope of included cards in any data accumulation. I.e, this parameter only impacts the scope of what is drawn. Use the conditions parameter to restrict the cards to be accumulated.	no
x-labels-step	Allow user to specify that only every N labels should be displayed on the x-axis. This is useful when plotting against a property with many values, such as date properties. Default is 1, except in the case of date properties with more than 14 values, in which case the default is 7.	No
x-labels-conditions	When charting against a card property, allow the user to specify conditions to narrow the set of cards to be used as x labels. Does not work when charting against text, numeric, or user properties. Use x-labels-start and x-labels-end to restrict the set of labels for those property types.	No
x-labels-tree	When charting against a card property, this parameter allows the user to specify a tree from which to define the x-labels values. Using this parameter will mean x-labels are displayed as hierarchical names and card numbers will not be used. In practice this is likely only to be needed in the situation where charts are used to visualize data from multiple projects and where the cards that represent the data in these projects (e.g. "Release 1" or "Iteration 1") are not the same card numbers.	No	If not specified card numbers will be used to as x-labels values.
show-start-label	One of [true/false] specifying whether to add a data point at the start of your series to show an implied starting point. This is especially useful when wanting to show a down-from line starting from the down-from value, or when wanting to show a line starting from 0. The default value is false unless any series specifies a 'down-from' parameter, in which case the default is true. The label can be set with the 'start-label' parameter.	No
start-label	Any text to be used as the label when using the 'show-start-label' parameter.	No
Chart-level options that can be overridden by any individual series
Name	Meaning	Required	Default value
chart-type	One of [line/area/bar] specifying how to draw each series. Default is line. Can be overridden by an individual series type.	No	line
line-width	Line width for any series of type line. Default is 3.	No
line-style	One of [solid/dash] specifying line style for any series of type line. Default is solid.	No
trend	One of [true/false] specifying whether to plot each series' data beyond the point at which the series contains no new data. Defaults to false. Can be overridden by an individual series.	No
trend-scope	Can be 'all' or an integer number. Specify the number of 'recent' data points (from the set of relevant data points-see trend-ignore) to be used in plotting the trend. Defaults to 'all.' Can be overridden by an individual series.	No
trend-ignore	One of [none/zeroes-at-end/zeroes-at-end-and-last-value] specifying which data points at the end of the series to ignore when plotting the trend. The 'zeroes-at-end' option ignore all zeroes in the series beyond the last non-zero value. The 'zeroes-at-end-and-last-value' option ignores all zeroes in the series beyond the last non-zero value as well as that non-zero value, assuming that it's an 'in-progress' item. The 'none' option considers all data points in the series. The default is 'zeroes-at-end-and-last-value.' Can be overridden by an individual series.	No
trend-line-color	Specifies the color of the trend line. Defaults to same color as actual data line. Can be overridden by an individual series.	No
trend-line-style	One of [dash/solid] specifying the line's style. The default is dash. Can be overridden by an individual series.	No
trend-line-width	Any integer number greater than 0 specifying the line's width. Can be overridden by an individual series.	No
data-point-symbol	One of [none/square/diamond] specifying whether to plot the data points. Default value is 'none.' Can be overridden by a series. Only applicable to chart-type of 'line'	No
data-labels	One of [true/false] specifying whether to show the value of each data point. Default value is 'false.' Can be overridden by a series.	No
project	Any valid project identifier, specifying which project’s cards will be plotted by this chart. Authorization will be enforced upon view. That is, if a user does not have access to a project, the card or wiki page will not be available for that user.	No	Default is the project to which the page or card containing the macro belongs to.
Series-level options
Name	Meaning	Required	Default value
line-width	Overrides chart-level setting. See chart-level description.	No
line-style	Overrides chart-level setting. See chart-level description.	No
label	Any text specifying name of series to be displayed in the legend.	Yes
color	And text specifying a standard web color indicating the color to be used when plotting the series.	No
data	MQL SELECT clause specifying the property and aggregation (and optional WHERE clause) for this series.	Yes
type	Overrides chart-level 'chart-type' setting. See chart-level description.	Yes
data-point-symbol	Overrides chart-level setting. See chart-level description. Only applicable to type of 'line.'	No
data-labels	Overrides chart-level setting. See chart-level description.	No
down-from	MQL SELECT clause specifying a value from which this series will be plotted down from. This is how Mingle supports burn downs. E.g. SELECT SUM WHERE 'Entered Scope Iteration' IS NOT NULL	No
trend	Overrides chart-level setting. See chart-level description.	No
trend-scope	Overrides chart-level setting. See chart-level description.	No
trend-ignore	Overrides chart-level setting. See chart-level description.	No
trend-line-color	Overrides chart-level setting. See chart-level description.	No
trend-line-style	Overrides chart-level setting. See chart-level description.	No
trend-line-width	Overrides chart-level setting. See chart-level description.	No
project	Any valid project identifier, specifying which project’s cards will be plotted by this series. Authorization will be enforced upon view. That is, if a user does not have access to a project, the card or wiki page will not be available for that user.	No	Defaults to what is defined at the chart level.

Stacked bar chart

Suppose you are tracking when cards enter scope, have been fully prepared for development, and are completed. You would like a chart that can display a running total of cards in each of those three states at the end of each iteration. To most effectively use the stack-bar-chart to display this sort of chart you will need to track three separate 'iteration' properties, each specifying when the card entered a particular state.

Macro markup is space sensitive and we advise you to stick to the indentation scheme specified in the example. If you add project as a parameter this needs to be added to a new line as shown in the markup below.

{{
  stack-bar-chart
    conditions: 'Release' = '2.3' AND 'Type' = 'Story' AND NOT 'Iteration' = NULL
    labels: SELECT DISTINCT 'Iteration' ORDER BY 'Iteration'
    cumulative: true
    project: agile
    series:
    - label: Closed
      color: green
      type: bar
      data: SELECT 'Closed Iteration', COUNT(*) WHERE NOT 'Closed Iteration' = NULL
      combine: overlay-bottom
    - label: Analysis Complete
      color: yellow
      type: bar
      data: SELECT 'Analysis Complete Iteration', COUNT(*) WHERE NOT 'Analysis Complete Iteration' = NULL
      combine: overlay-bottom
    - label: Entire Scope
      color: blue
      type: bar
      data: SELECT 'Entered Scope Iteration', COUNT(*) WHERE NOT 'Entered Scope Iteration' = NULL
      combine: total
}}

Preview

Parameters
Chart-level options
Name	Meaning	Required	Default value
conditions	MQL condition clause that restricts the cards which will be included in all of the data series	No	If not specified, all cards will be considered for each series.
labels	MQL query that returns a list of values to be used as labels across the x-axis. Using the example above, all values for a card type 'Iteration' are returned and used as labels for the x-axis in the stack bar chart. You must use 'SELECT' statement. This works similarly as x-labels-conditions or x-labels-property on data series chart.	No	If not specified, the values of the first property specified on the 'data' parameter on 'series level' will be used as the x-axis labels.
cumulative	Whether each data series includes all previous series. I.e., if a bar shows only data for that x-axis label, or a running total, including its own data and all previous bars.	No	TRUE
x-label-start	Allow user to specify the start value for labels on the x axis. Must be a valid, existing value for the x labels property. Defaults to first value for the x labels property. When x labels property is a date property, the value can be earlier than any existing value. Note that when plotting a cumulative chart, this parameter does not impact the scope of included cards in any data accumulation. I.e, this parameter only impacts the scope of what is drawn. Use the conditions parameter to restrict the cards to be accumulated.	No	If not specified, the first label value returned by the label query will be used.
x-label-end	Allow user to specify the end value for labels on the x axis. Must be a valid, existing value for the x labels property. Defaults to last value for the x labels property. When x labels property is a date property, the value can be later than any existing value. Note that when plotting a cumulative chart, this parameter does not impact the scope of included cards in any data accumulation. I.e, this parameter only impacts the scope of what is drawn. Use the conditions parameter to restrict the cards to be accumulated.	No	If not specified, the last label value returned by the label query will be used.
x-label-step	Allow user to specify that only every N labels should be displayed on the x-axis. This is useful when plotting against a property with many values, such as date properties. Default is 1, except in the case of date properties with more than 14 values, in which case the default is 7.	No	If not specified, the following defaults will be used depending on what kind of property is used on the x-axis. 5 days at a time for Date Properties. Every label value for others.
x-labels-tree	When charting against a card property, this parameter allows the user to specify a tree from which to define the x-labels values. Using this parameter will mean x-labels are displayed as hierarchical names and card numbers will not be used. In practice this is likely only to be needed in the situation where charts are used to visualize data from multiple projects and where the cards that represent the data in these projects (e.g. "Release 1" or "Iteration 1") are not the same card numbers.	No	If not specified card numbers will be used to as x-labels values.
x-title	The title for the x-axis. Use this to override the default if there is a better name to explain what the labels represent.	No	If not specified, the property name of the series with a combine of 'total' series will be used. If no series is specified with a of 'total', the property of the very first series will be used.
y-title	The title for the y-axis.	No	If not specified, this will default to the property name of the first series.
three-d	If set to true, 3-d effects will be turned on. Data series of type bar will be shown as rectangular columns. Data series of type area will be shown in different layers, stacked one behind the other. Line graphs do not benefit much from 3-d effects.	No	false
chart-height	Specify the height of the entire chart (plot area plus legend) in pixels.	No	300
chart-width	Specify the width of the entire chart (plot area plus legend) in pixels.	No	400
plot-height	Specify the height of the plot area in pixels.	No	220
plot-width	Specify the width of the plot area in pixels.	No	230
plot-x-offset	Specify the length of the offset of the plot area from the right of the chart area in pixels. Increasing the offset will move the plot closer to the centre of the chart area.	No	50
plot-y-offset	Specify the length of the offset of the plot area from the top of the chart area in pixels. Increasing the offset will move the plot closer to the centre of the chart area.	No	10
label-font-angle	Angle of the x-axis labels.	No	45
legend-top-offset	Specify the offset of the legend from the top of the chart area in pixels. Increasing the offset will move the legend lower in the chart area.	No	5
legend-offset	Specify the offset of the legend from the right side of the plot area in pixels. A negative offset will move the legend inside the plot area.	No	20
legend-max-width	Specify the maximum width of the legend in pixels. Legend labels will wrap to fit the maximum width.	No	120
series	A list of data series. Each series represents a portion of each bar on the bar chart. When type is set to area or line, each series represents a different chart line. (Note that each series need not select the same property for this chart to be meaningful. Each series must select data that is of the same type and same scale, but not the exact same property.)	Yes. At least one series must be specified.
Chart-level options that can be overridden by any individual series
Name	Meaning	Required	Default value
project	Any valid project identifier, specifying which project’s cards will be plotted by this chart. Authorization will be enforced upon view. That is, if a user does not have access to a project, the card or wiki page will not be available for that user.	No	Default is the project to which the page or card containing the macro belongs to.
Series-level options
Name	Meaning	Required	Default value
label	The name of this series to appear in the chart's legend	No
color	A hex string or standard web color to be used when rendering a series	No
data	A MQL query that selects property values and an aggregation of those values. The property values will be used to group the aggregation. The aggregation represents how much of the bar will be represented by this series.	Yes
combine	How to combine the value of this series with the values of other series in a given bar. Valid values are total, overlay-top, and overlay-bottom. Use total to specify that a series represents the full height of the bar. Use overlay-bottom to have this series render in a stack, starting at the bottom of the bar. Use overlay-top to have this series render in a stack, starting at the top of the bar.	Yes
type	How to draw a series. Valid values are area, line, and bar.	No	bar
hidden	Will the graph for this data series show up in the final graph? Use this to not show data series that are only used for calculation. This is similar to setting the series color to transparent.	No	false
project	Any valid project identifier, specifying which project’s cards will be plotted by this series. Authorization will be enforced upon view. That is, if a user does not have access to a project, the card or wiki page will not be available for that user.	No	Defaults to what is defined at the chart level.

Ratio bar chart

Display a bar chart with each bar showing the percentage of closed stories in a particular feature. In terms of card properties, what we want to show is this: for all cards with property 'Type' equal to 'Story,' calculate the percentage (based upon the SUM of the 'Size' property) of cards with property 'Status' equal to 'Closed.'

{{
    ratio-bar-chart
      totals: SELECT Feature, SUM(Size) WHERE Type = Story
      restrict-ratio-with: Status = Closed
      project: agile
}}

Preview

Parameters
Name	Meaning	Required	Default value
totals	A MQL query returning the full scope of the chart. The MQL query must return a two column results set. The values in the first column will be the labels for the result set. The values in the second column represent the full height of the bars (the y-axis).	Yes
restrict-ratio-with	A MQL condition that represents the portion of each bar to be filled in with color. The results of the totals parameter represent 100% of the height.	Yes
color	A hex string representing the color of the bars. Can optionally be any standard web color name.	No	LightBlue
x-title	The title for the x-axis. Use this to override the default if there is a better name to explain what the labels represent.	No	If not specified, the name of the first property in the totals query will be used.
y-title	The title for the y-axis.	No	If not specified, this will default to the property name of the property being plotted in the totals query.
three-d	If set to true, 3-d effects will be turned on. The data will be shown as rectangular columns.	No	false
chart-height	Specify the height of the entire chart (plot area plus legend) in pixels.	No	300
chart-width	Specify the width of the entire chart (plot area plus legend) in pixels.	No	400
plot-height	Specify the height of the plot area in pixels.	No	220
plot-width	Specify the width of the plot area in pixels.	No	230
plot-x-offset	Specify the length of the offset of the plot area from the right of the chart area in pixels. Increasing the offset will move the plot closer to the centre of the chart area.	No	50
plot-y-offset	Specify the length of the offset of the plot area from the top of the chart area in pixels. Increasing the offset will move the plot closer to the centre of the chart area.	No	10
label-font-angle	Angle of the x-axis labels.	No	45
project	Any valid project identifier, specifying which project’s cards will be plotted by this chart. Authorization will be enforced upon view. That is, if a user does not have access to a project, the card or wiki page will not be available for that user.	No	Default is the project to which the page or card containing the macro belongs to.

Pie chart

Display a pie chart showing a percentage breakdown of all bugs (cards with a property 'Type' set to 'Bug') by status

Macro markup is space sensitive and we advise you to stick to the indentation scheme specified in the example.

{{
  pie-chart
    data: SELECT Feature, COUNT(*) WHERE Type = Story
}}

Preview

Parameters
Name	Meaning	Required	Default value
data	MQL query returning the data to be represented by the pie chart. The query must return a two-column result set. The values in the first column represent the chart labels. The values in the second column represent the portion of the pie for that row. Aggregation is supported.	Yes
project	Any valid project identifier, specifying which project’s cards will be plotted by this chart. Authorization will be enforced upon view. That is, if a user does not have access to a project, the card or wiki page will not be available for that user.	No	Default is the project to which the page or card containing the macro belongs to.
chart-width	Specify the width of the entire chart (plot area plus labels) in pixels.	No	440
chart-height	Specify the height of the entire chart (plot area plus labels) in pixels.	No	300
radius	Specify the length of the pie radius in pixels.	No	100

Tables

Table - based on a query

Display a table with two columns, name and number - one row for each card that has a property 'Priority' set to 'Critical' and a property 'Release' set to 'Release One.' As usual, quotes are used only when grouping words with spaces in them.

{{
    table 
      query: SELECT name, number WHERE Priority = Critical AND Release = 'Release One'
      project: project_one
}}

Preview

Parameters
Name	Meaning	Required	Default value
project	Any valid project identifier, specifying which project’s cards will be displayed. Authorization will be enforced upon view. That is, if a user does not have access to a project, that data series will not be included in the chart for that user. Default is the project to which the page or card containing the macro belongs.	No	Default is the project to which the page or card containing the macro belongs to.
query	A custom MQL query, the results of executing this query will be shown in the table.	One, and only one, of query or view is required.

Table - based on a favorite

Render a table containing all cards that are a part of the favorite named 'Release One'. Quotes may be omitted if the favorite name does not contain any spaces.

{{
	table view: 'Release One'
	project: project_one
}}

Preview

Parameters
Name	Meaning	Required	Default value
view	A previously saved favorite, the contents of which will be shown in the table.	One, and only one of query or view is required.
project	Any valid project identifier, specifying which project’s view will be displayed. Authorization will be enforced upon view. That is, if a user does not have access to a project, that data series will not be included in the chart for that user. Default is the project to which the page or card containing the macro belongs.	No	Default is the project to which the page or card containing the macro belongs to.

Pivot table

Display a pivot table summing the estimates for in-scope stories by priority (cards of type 'Story' and property 'Story Status' is not set to 'Out of Scope') for each status. The table will not display any empty rows or columns, but will display a total for each status in the bottom row.

{{
  pivot-table
    conditions: Type = Story AND 'Story Status' != 'Out of Scope'
    aggregation: SUM('Story Estimate - Original')
    rows: Priority
    columns: 'Story Status'
    empty-rows: true
    empty-columns: true
    totals: true
    project: agile
}}

Preview

Chart level options
Name	Meaning	Required	Default value
aggregation	The database function to perform across all cards having the row and column values for a particular cell. The result of this function will display in the cell	No	COUNT(*)
columns	The card property whose values make up the columns of the table	Yes
conditions	A custom MQL condition clause that restricts the cards which are to be aggregated	No	If not specified, all cards are aggregated.
empty-columns	Should the table contain empty columns	No	TRUE
empty-rows	Should the table contain empty rows	No	TRUE
links	Should the cell contain a link to a card list containing the cards specified by the cell's row and column values	No	TRUE
project	Any valid project identifier, specifying which project’s cards will be plotted by this chart. Authorization will be enforced upon view. That is, if a user does not have access to a project, that data series will not be included in the chart for that user. Default is the project to which the page or card containing the macro belongs.	no
rows	The card property whose values make up the rows of the table	Yes
totals	Should column totals display	No	FALSE

Query macros

Average query

Calculate average story size

			{{
				average query: SELECT size WHERE type = story
				project: project_one
			}}

Preview

Parameters
Name	Meaning	Required	Default value
query	A custom MQL query, the results of executing this query will be shown as an average value.	Yes
project	Any valid project identifier, specifying which project’s cards will be used to calculate the average query. Authorization will be enforced upon view. That is, if a user does not have access to a project, that data series will not be included in the chart for that user. Default is the project to which the page or card containing the macro belongs.	No	Default is the project to which the page or card containing the macro belongs to.

Value query

Calculate the total size of all stories

			{{
				value query: SELECT SUM('size') WHERE Type = Story
				project: project_one
			}}

Preview

Parameters
Name	Meaning	Required	Default value
query	A custom MQL query, the results of executing this query will be shown as an value.	Yes
project	Any valid project identifier, specifying which project’s cards will be used to calculate the value query. Authorization will be enforced upon view. That is, if a user does not have access to a project, that data series will not be included in the chart for that user. Default is the project to which the page or card containing the macro belongs.	No	Default is the project to which the page or card containing the macro belongs to.

Layout

One-column layout

To create a single column layout block, this will create a named section within a wiki page which spans the wiki page and encloses other wiki content.

{% dashboard-panel %}
	{% panel-heading %}A heading for the layout{% panel-heading %}
	{% panel-content %}
		Some wiki content for layout
	{% panel-content %}
{% dashboard-panel %}

Preview

Where you would substitute appropriate text and content for A heading for the layout, and Some wiki content for layout respectively. The layout content can include any other wiki formatting or content, however nesting layout blocks is not recommended except as part of a two-column layout.

Two-column layout

To create a two column layout block, this will create a set of named sections within a wiki page, organized into two columns of equal width.


{% two-columns %}
	{% left-column %}
		{% dashboard-half-panel %}
			{% panel-heading %}Top Left heading{% panel-heading %}
			{% panel-content %}
			  Top Left content
			{% panel-content %}
		{% dashboard-half-panel %}
	{% left-column %}
	{% right-column %}
		{% dashboard-half-panel %}
			{% panel-heading %}Top Right heading{% panel-heading %}
			{% panel-content %}
			  Top Right content
			{% panel-content %}
		{% dashboard-half-panel %}
	{% right-column %}
{% two-columns %}

{% two-columns %}
	{% left-column %}
		{% dashboard-half-panel %}
			{% panel-heading %}Second Left heading{% panel-heading %}
			{% panel-content %}
			  Second Left content
			{% panel-content %}
		{% dashboard-half-panel %}
	{% left-column %}
{% two-columns %}

Preview

Where you would substitute appropriate text and content for xxx left/right panel, and Some content. You can add multiple

{% dashboard-half-panel %}

blocks on each side of the layout.

Mixed column layout

This is an example of using both one-column and two-column layout blocks in the same page

{% dashboard-panel %}
	{% panel-heading %}A heading for the layout{% panel-heading %}
	{% panel-content %}
		Some wiki content for layout
	{% panel-content %}
{% dashboard-panel %}

{% two-columns %}
	{% left-column %}
		{% dashboard-half-panel %}
			{% panel-heading %}Top Left heading{% panel-heading %}
			{% panel-content %}
			  Top Left content
			{% panel-content %}
		{% dashboard-half-panel %}
	{% left-column %}
	{% right-column %}
		{% dashboard-half-panel %}
			{% panel-heading %}Top Right heading{% panel-heading %}
			{% panel-content %}
			  Top Right content
			{% panel-content %}
		{% dashboard-half-panel %}
	{% right-column %}
{% two-columns %}

{% two-columns %}
	{% left-column %}
		{% dashboard-half-panel %}
			{% panel-heading %}Second Left heading{% panel-heading %}
			{% panel-content %}
			  Second Left content
			{% panel-content %}
		{% dashboard-half-panel %}
	{% left-column %}
{% two-columns %}

Preview

Section line

Creates a section line separating sections of text

Section one

---

Section two

Preview

Other macros

Project macro and Project as a chart option level

Use Project macro to get project identifier

The user can display the identifier of the current project with the following markup:

{{ project }}

Use Project as a chart level option to create charts using another project's data

The markup below shows how to create a pie chart using data from another project by using the project identifier, for example great_bank, as the value for project chart level option. This will allow users to access another project's data when creating charts on the current project.

See cross project reporting for more information on using another project's data when creating charts on the current project.

{{
  pie-chart
    data: SELECT 'Feature', Count(*) WHERE Type = Story and 'Story Status' = Accepted
    project: great_bank
}}

Preview

Project variable value macro

Displays the current value of the specified project variable

{{project-variable name: (current release)}}

where 'current release' is the name of a project variable in the project.

This project-variable macro can not be used as a value of other macro parameters. For example, although you may expect to use this macro to specify x-label-start on a data-series-chart this functionality is not supported.

Parameters
Name	Meaning	Required	Default value
name	Name of a project variable.	Yes
project	Any valid project identifier, specifying which project’s project variable is being referred to.	No	Default is the project to which the page or card containing the macro belongs to.

Help

Macro reference

Text formatting

Bold text

Preview

Italicize text

Preview

Underline text

Preview

Strike-through text

Preview

Color text

Preview

Apply heading level

Preview

Create bulleted list

Preview

Create numbered list

Preview

Right indent text

Preview

Left indent text (Outdent)

Preview

Charts

Data series chart

Preview

Stacked bar chart

Preview

Ratio bar chart

Preview

Pie chart

Preview

Tables

Table - based on a query

Preview

Table - based on a favorite

Preview

Pivot table

Preview

Query macros

Average query

Preview

Value query

Preview

Layout

One-column layout

Preview

Two-column layout

Preview

Mixed column layout

Preview

Section line

Preview

Other macros

Project macro and Project as a chart option level

Use Project macro to get project identifier

Use Project as a chart level option to create charts using another project's data

Preview

Project variable value macro